
Anti sulfurated resistor for automotive, 0201~2512, 1ohm~10Mohm. is using high sulfuration-proof inner electrode material and special construction of termination to increase the strength to against the sulfuration. Sulfuration occurs in the resistor with silver for inner electrode. Sulfurate environment is included as sulfur gas near hot spring or volcanos or produced through firing of raw oil, even outdoor equipment under air pollution could be affected. Silver sulfide produced through this reaction impacts the conductivity therefore resistor gets disconnected.
Viking ‘s Anti-sulfurated resistors are an ideal choice to prevent your electronic devices being damaged from the high –sulfur environment.
This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material.
Special construction to prevent sulfuration in a sulfur containing environment.
AEC-Q200 Qualified
100% CCD inspection.
MSL : Level 1
Products with lead-free terminations meet EU RoHS requirements. Pb-glass contained in electrodes, resistors element and glass are exempted by RoHS
Automotive.
High-end Computer.
Industrial Equipment.
Automatic Equipment Controller.
Medical Equipment.
High-end Multimedia Electronics.
Outdoor Electronic Applications.


| Item Type | Power Rating at 70°C Jumper Rated Current | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | Resistance Range | TCR (PPM/°C) | ||
|---|---|---|---|---|---|---|---|---|
| ± 0.5% (E24,E96) | ± 1% (E24,E96) | ± 5% (E24) | ||||||
| AS01 (0201) | 1/20W | -55 ~ +155°C | 25V | 50V | - | 1Ω - 10MΩ | ± 200 | |
| Jumper: 1A | - | 0Ω (<50mΩ) | - | |||||
| AS02 (0402) | 1/16W | 75V | 150V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |||
| Jumper: 1A | 0Ω (<50mΩ) | - | ||||||
| AS03 (0603) | 1/10W | 75V | 150V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |||
| Jumper: 1A | 0Ω (<50mΩ) | - | ||||||
| AS05 (0805) | 1/8W | 150V | 300V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |||
| Jumper: 2A | 0Ω (<50mΩ) | - | ||||||
| AS06 (1206) | 1/4W | 200V | 400V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |||
| Jumper: 2A | 0Ω (<50mΩ) | - | ||||||
| AS10 (1210) | 1/3W | 200V | 400V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |||
| Jumper: 2.5A | 0Ω (<50mΩ) | - | ||||||
| AS0A (2010) | 3/4W | 200V | 400V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |||
| Jumper: 3.5A | 0Ω (<50mΩ) | - | ||||||
| AS12 (2512) | 1W | 250V | 500V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |||
| Jumper: 4A | 0Ω (<50mΩ) | - | ||||||
Operating Voltage = √(P x R) or Max. Operating Voltage listed above, whichever is lower.
Overload Voltage = 2.5 x √(P x R) or Max. Overload Voltage listed above, whichever is lower.