There is high reliability on monolithic structure of laminated layers
And its character of excellent soldering ability and soldering resistance ability is suitable for reflow soldering and peak soldering
It includes high and stable capacitance
This type of capacitor is a special electronic component for automobiles, which has passed all the experimental conditions set by the AEC-Q200 standard, and is more stable and safe during automobile use
The materials used mainly include NPO with high temperature stability and X7R, X5R, X7S with high dielectric constant
Executive StanDA (0.8)rd: GB/T 21041-2007;GB/T 21042-2007
AEC-Q200 Compliance
Excellent soldera bility and solder resistance, suitable for wave soldering and reflow soldering.
Maximum operating temperature up to 125°C 150°C
High reliability, good resistance to mechanical stress and thermal shock.
Short response time
AEC Q200 Compliance
This specification involved in the product is recommended for automotive multimedia, wireless connection system and body comfort system. It can be used for automobile power system and safety management system without special clarifications. Please contact with our company for further confirmation before the products to be used for the Automotive area.
Particular ceramic material and coil structure provide high frequency application range up to 10GHz
Small size and low profile
Available in various sizes
Excellent solderability and heat resistance
AEC-Q200 Compliance
High common mode impedance at high frequency effects excellent noise suppression performance
Small sizes and low profile
100% Lead(Pb) & Halogen-Free and RoHS compliant
AEC-Q200 Compliance
Carbonyl Powder
Compact design
High current, low DCR, high efficiency
Very low acoustic noise and very low leakage flux noise
High reliability -Reliability test complied to AEC-Q200
100% Lead(Pb) & Halogen-Free and RoHS compliant
Powerful components with composite co-fired material to solve EMI problem for high speed differential signal transmission line as USB, and LVDS, without distortion to high speed signal transmission.
MIPI, MHL serial interface in mobile device
AEC-Q200 Compliance
Part Numbering
This specification involved in the product is recommended for automotive multimedia, wireless connection system and body comfort system. It can not be used for automobile power system without special clarifications. Please contact with VIKING for further confirmation before the products to be used for the automotive area.
SMD miniature power inductor , small size and low profile , it corresponds to high current , shield structure magnetically. Storng structure against a shock -proof for LCD display, small size of DC to DC converters, PDA.
Nudity E-beam welded metal strip resistors, pure copper Electrodes are the ideal solution for current sensing applications
Excellent reliability, stability, Auti-pulse capability
Special welding process, all-metal construction, Supports low resistance, The surface is pickled and passivated for strong weather resistance
High temperature silicon molded for sever working Environment
Very low EMF (<1u V/C)
Ultra-low parasitic inductance down to 2nH, Fast response, Can be used for high frequency AC current detection
AEC-Q200 Reliability Testing passed
Metal Foil Resistors can offer twice the power than general thick film.
Sizes from 0603~2512, 1%, 5%, resistance from 20m~200mohm, low TC of 50/100ppm. 1W in size of 1206, 1/2W in size of 0603
MF series is constructed with a metal foil resistive element mounted on a ceramic substrate for excellent heat conductivity to enhance power. Metal Foil current sensing resistors meet the accuracy and stability on critical power management design. Better performance over thick film process, cost efficient for market competitiveness.
Tantalum nitride thin film resistor
High stability in humid environments
AEC-Q200 Qualified
Tight tolerance down to ±0.05%
Extremely low TCR down to ±10PPM/°C
Resistance values from 10 ohm to 1M ohm
Special materials, design, and processing for high sulfur applications
Test proven immunity to humidity, moisture, and sulfur
RoHS (Pb)-free without exemption
Wider bottom terminal enabling higher power capability (short side terminal)
High Purity Ceramic substrate
Power rating up to 2.5W
Resistance 10Ω ~ 100KΩ (1206 only)
AEC-Q200 Qualified
Advanced sulfur resistance verified according to ASTM B 809
Total Lead(Pb)-free without RoHS exemptions
High operating voltage Umax. up to 1000 V
Low voltage coefficient <1.5 ppm/V
Superior moisture resistivity (85℃;85% RH)
AEC-Q200 Qualified
Test proven immunity to humidity, moisture, and sulfur
Total Lead(Pb)-free without RoHS exemptions
IEC 62368-1:2023 Safety Certificate issued by UL
High voltage MELF metal film precision resistor, ready for the size of 0204/0207. Tight tolerance of 0.1%, 25/50ppm. 340K~3.4Mohm. Max Overload upto 2000V. The MELF is cylindrical in shape and with metal electrode Leadless face resistor. Land pattern sizes are the same as SMD chip resistors. High quality of MELF resistors offer excellent electrical and Environmental Stability, exceptional stability demonstrated over life, biased humidity, and short time overload testing.
The MELF is cylindrical in shape and with metal electrode Leadless face resistor. Land pattern sizes are the same as SMD chip resistors.
It is manufactured by depositing a homogeneous film of NiCr onto a high-grade ceramic body. High quality of MELF resistors offer excellent electrical and Environmental Stability, exceptional stability demonstrated over life, biased humidity, and short time overload testing.
Short lead time, Effective cost control, price competitiveness
LRP 1206 Very High Power 1W , 2512 3W Surface-Mount Power Metal Strip resistor. Metal strip low ohm resistor for sensing large current, withstand high temperature. Low TCR for stable resistance drift through high temp. wide range of resistance upto 200mohm. It can endure high-temperature performance up to 170/°C.
AEC Q200 Qualified
Highly reliable multilayer electrode construction
Reduced size of final equipment reliability
Low TCR of 50 PPM/PPM/°C
Resistance v alues from 1 to 1 0 ohm
High p urity a lumina s ubstrate for h igh p ower d issipation
RoHS Compliance
100% CCD inspection
MSL: Level 1
AEC-Q200 Qualified
Small size and light weight
Highly reliable multilayer electrode construction
Compatible with all soldering process
100% CCD inspection
MSL: Level 1