
Anti-Surfur resistors , sizes from 0201-2512, resistance range 1ohm -10Mohm. Tolerance of 0.5%~5%. High power is available.
AS series is using high sulfuration-proof inner electrode material and special construction of termination to increase the strength to against the sulfuration. Sulfuration occurs in the resistor with silver for inner electrode. Sulfurated environment is included as sulfur gas near hot spring or volcanos or produced through firing of raw oil, even outdoor equipment under air pollution could be affected. Silver sulfide produced through this reaction impacts the conductivity therefore resistor gets disconnected.
Viking ‘s Anti-sulfurated resistors are an ideal choice to prevent your electronic devices being damaged from the high –sulfur environment.
This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material.
Special construction to prevent sulfuration in a sulfur containing environment.
MSL: Level 1
Products with lead-free terminations meet EU RoHS requirements. Pb-glass contained in electrodes, resistors element and glass are exempted by RoHS
High-end Computer
Industrial Equipment
Automatic Equipment Controller
Medical Equipment
High-end Multimedia Electronics
Outdoor Electronic Applications


| Item Type | Power Rating at 70°C Jumper Rated Current | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | Resistance Range | TCR (PPM/°C) | ||
|---|---|---|---|---|---|---|---|---|
| ±0.5% (E24,E96) | ±1% (E24,E96) | ±5% (E24) | ||||||
| AS01 (0201) | 1/20W | -55 ~ +125°C | 25V | 50V | - | 1Ω - 10MΩ | ±200 | |
| Jumper: 1A | - | 0Ω (<50mΩ) | - | |||||
| AS02 (0402) | 1/16W | -55 ~ +155°C | 75V | 150V | - | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ±200 ±100 ±200 | |
| Jumper: 1A | - | 0Ω (<50mΩ) | - | |||||
| AS03 (0603) | 1/10W | 75V | 150V | - | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ±200 ±100 ±200 | ||
| Jumper: 1A | - | 0Ω (<50mΩ) | - | |||||
| AS05 (0805) | 1/8W | 150V | 300V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ±200 ±100 ±200 | |||
| Jumper: 2A | - | 0Ω (<50mΩ) | - | |||||
| AS06 (1206) | 1/4W | 200V | 400V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ±200 ±100 ±200 | |||
| Jumper: 2A | - | 0Ω (<50mΩ) | - | |||||
| AS10 (1210) | 1/3W | 200V | 400V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ±200 ±100 ±200 | |||
| Jumper: 2.5A | - | 0Ω (<50mΩ) | - | |||||
| AS0A (2010) | 3/4W | 200V | 400V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ±200 ±100 ±200 | |||
| Jumper: 3.5A | - | 0Ω (<50mΩ) | - | |||||
| AS12 (2512) | 1W | 250V | 500V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ±200 ±100 ±200 | |||
| Jumper: 4A | - | 0Ω (<50mΩ) | - | |||||