
Anti sulfurated resistor Array for critical designs. The most common size of 0603 and 0402 are offering concave terminations. The size of 0201 is in flat type design for high reliability for 4P2R or 8P4R. Chip Resistor Arrays (Network) is single packaged device containing a network of homogeneous resistor elements. R array (R network) is typically used for convenience and cost or space saving when several same resistors applied in a layout.
This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material.
Special construction to prevent sulfuration in a sulfur containing environment.
Small size and light weight
Reduction of assembly costs and matching with placement machines
Reliability, high quality
Suitable for IR reflow soldering
MSL: Level 1
High-end Computer.
Industrial Equipment.
Automatic Equipment Controller.
Medical Equipment.
High-end Multimedia Electronics.
Outdoor Electronic Applications.


| Item Type | Power Rating at 70°C | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | Number Of Resistors | Resistance Range | TCR (PPM/°C) | |
|---|---|---|---|---|---|---|---|---|
| ± 1% (E24,E96) | ± 5% (E24) | |||||||
| AS21 | 1/32W | -55 ~ +125°C | 12.5V | 25V | 2 | - | 3Ω – 9.1Ω | ± 300 |
| 10Ω - 1MΩ | ± 200 | |||||||
| AS41 | 1/32W | -55 ~ +125°C | 12.5V | 25V | 4 | 10Ω - 1MΩ | ± 200 | |
| AS42 | 1/16W | -55 ~ +155°C | 25V | 50V | 4 | 10Ω - 1MΩ | 1Ω - 1MΩ | ± 200 |
Operating Voltage = √(P x R) or Max. operating voltage listed above, whichever is lower.
Overload Voltage = 2.5 x √(P x R) or Max. overload voltage listed above, whichever is lower.
The power rating depends on the maximum temperature of the resistive element. Due to the power dissipation of the resistor, the
temperature of the resistive element will rise depending on the condition of heat dissipation from PCB. The maximum power rat ing in
application only applies if the temperature of the resistive element is not exceed 125°C