
Anti-Sulfurated Thick Film Flat Array Chip Resistor
This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material.
Special construction to prevent sulfuration in a sulfur containing
environment
Small size and light weight
Reduction of assembly costs and matching with placement
machines
Reliability, high quality
Suitable for IR reflow soldering
MSL: Level 1
High-end Computer
Industrial Equipment
Automatic Equipment Controller
Medical Equipment
High-end Multimedia Electronics
Outdoor Electronic Applications


| Item Type | Power Rating at 70°C | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | Number Of Resistors | Resistance Range | TCR (PPM/°C) | |
|---|---|---|---|---|---|---|---|---|
| ± 1% (E24,E96) | ± 5% (E24) | |||||||
| ASF42 | 1/16W | -55 ~ +155°C | 50V | 100V | 4 | 10Ω – 1Ω | 1Ω – 10Ω | ± 200 |
| - | 0Ω (<50Ω) | - | ||||||
| ASF43 | 1/10W | -55 ~ +155°C | 50V | 100V | 4 | 10Ω – 1Ω | 1Ω – 10Ω | ± 200 |
| - | 0Ω (<50Ω) | - | ||||||
Operating Voltage = √(P x R) or Max. operating voltage listed above, whichever is lower.
Overload Voltage = 2.5 x √(P x R) or Max. overload voltage listed above, whichever is lower.
The power rating depends on the maximum temperature of the resistive element. Due to the power dissipation of the resistor, the
temperature of the resistive element will rise depending on the condition of heat dissipation from PCB. The maximum power rat ing in application only applies if the temperature of the resistive element is not exceed 125°C