
Automotive thick film resistor, Resistance 1ohm to10Mohm, sizes from 0201~2512, 1%, 5% ,high power. Special long termination offers high power. These rectangular resistors are high stability for any electronic applications in critical design especially for automotive industrial.
This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material.
AEC-Q200 Qualified
Highly reliable multilayer electrode construction.
Special construction to prevent sulfuration in a sulfur containing environment
Compatible with all soldering process.
100% CCD inspection.
MSL : Level 1
Products with lead-free terminations meet EU RoHS requirements.
Pb-glass contained in electrodes, resistors element and glass are
exempted by RoHS
Automotive Industry.
Telecommunication Equipments.
Radio and Tape Recorders, TV Tuners.
Digital Cameras, Watches, Pocket Calculators.
Computers, Instruments.
Medical Equipment.


| Item Type | Power Rating at 70°C Jumper Rated Current | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | Resistance Range | TCR (PPM/°C) | |
|---|---|---|---|---|---|---|---|
| ± 1% (E24, E96) | ± 5% (E24) | ||||||
| CR-01 (0201) | 1/20W | -55 ~ +125°C | 25V | 50V | 1Ω - 10MΩ | ± 200 | |
| Jumper: 1A | - | 0Ω (<50mΩ) | - | ||||
| CR-02 (0402) | 1/16W | -55 ~ +155°C | 75V | 150V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |
| Jumper: 1A | - | 0Ω (<50mΩ) | - | ||||
| CR-03 (0603) | 1/10W | -55 ~ +155°C | 75V | 150V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |
| Jumper: 1A | - | 0Ω (<50mΩ) | - | ||||
| CR-05 (0805) | 1/8W | -55 ~ +155°C | 150V | 300V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |
| Jumper: 2A | - | 0Ω (<50mΩ) | - | ||||
| CR-06 (1206) | 1/4W | -55 ~ +155°C | 200V | 400V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |
| Jumper: 2A | - | 0Ω (<50mΩ) | - | ||||
| CR-10 (1210) | 1/2W | -55 ~ +155°C | 200V | 400V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |
| Jumper: 2.5A | - | 0Ω (<50mΩ) | - | ||||
| CR-0A (2010) | 3/4W | -55 ~ +155°C | 400V | 800V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |
| Jumper: 3.5A | - | 0Ω (<50mΩ) | - | ||||
| CR-12 (2512) | 1W | -55 ~ +155°C | 500V | 1000V | 1Ω - 9.76Ω 10Ω - 1MΩ 1.02MΩ - 10MΩ | ± 200 ± 100 ± 200 | |
| Jumper: 4A | - | 0Ω (<50mΩ) | - | ||||
The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum permissible impulse voltage.