
High Voltage resistor with the size from 0402 to 2512, resistance up to 100M ohm , offers Max overload to 4000V in 2512, 3000V in 2010.
Thick Film special design to achieve high working voltage and stability in SMD chip resistors. One of the key function resistors in a circuit is detecting high voltage by voltage dividing. Rated voltage and maximum working voltage are specified for each resistor, which should not be exceeded when it is used. This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. HVR series offers the high voltage which can reduce using the numbers of resistors. Save cost and space. Generally, the higher resistance is against higher voltage.
This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material.
Highly reliable multilayer electrode construction.
Higher component and equipment reliability.
Excellent performance at high voltage.
Reduced size of final equipment.
IEC 62368-1 & IEC 60950-1 Safety Certificate issued by UL Demko.
AEC-Q200 Compliance
MSL: Level 1
Inverter
Outdoor Equipments
Converter
High Pulse Equipment


| Item Type | Power Rating at 70°C | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | Resistance Range | TCR (PPM/°C) | |
|---|---|---|---|---|---|---|---|
| ±1%(E24、E96) | ±5%(E24) | ||||||
| HVR02 (0402) | 1/16W | -55 ~ +155°C | 100V | 200V | 39KΩ - 1MΩ | ±100 | |
| 1.02MΩ - 10MΩ | 1.1MΩ - 20MΩ | ±200 | |||||
| - | 22MΩ - 100MΩ | ±400 | |||||
| HVR03 (0603) | 1/10W | 200V | 400V | 56KΩ - 1MΩ | ±100 | ||
| 1.02MΩ - 10MΩ | 1.1MΩ - 20MΩ | ±200 | |||||
| - | 22MΩ - 100MΩ | ±400 | |||||
| HVR05 (0805) | 1/8W | 400V | 800V | 100KΩ - 1MΩ | ±100 | ||
| 1.02MΩ - 10MΩ | 1.1MΩ - 20MΩ | ±200 | |||||
| - | 22MΩ - 100MΩ | ±400 | |||||
| HVR06 (1206) | 1/4W | 500V | 1000V | 100KΩ- 1MΩ | ±100 | ||
| 1.02MΩ - 10MΩ | 1.1MΩ - 20MΩ | ±200 | |||||
| - | 22MΩ - 100MΩ | ±400 | |||||
| HVR0A (2010) | 1/2W | 2000V | 3000V | 51KΩ- 1MΩ | ±100 | ||
| 1.02MΩ - 20MΩ | 1.1MΩ - 20MΩ | ±200 | |||||
| - | 22MΩ - 100MΩ | ±400 | |||||
| HVR12 (2512) | 1W | 3000V | 4000V | 30KΩ - 1MΩ | ±100 | ||
| 1.02MΩ - 20MΩ | 1.1MΩ - 20MΩ | ±200 | |||||
| - | 22MΩ - 100MΩ | ±400 | |||||
Operating Voltage=√(P*R) or Max. Operating Voltage listed above, whichever is lower.
Overload Voltage=2.5*√(P*R) or Max. Overload Voltage listed above, whichever is lower.